- Hem
- Bogpropeller
- Reservdelar
- Annat
- Retract mechanical SRV300 Common
Annat
Retract mechanical SRV300 Common
Artikelnummer: 20 0651
333 810,00 kr
(rekommenderat pris)
| Sparepart for | Value |
|---|---|
| Main products > Thrusters > DC > ERV | ERV300/300TC-48V ERV250/300TC-48V |
| Main products > Thrusters > Hydraulic > SRH | SRHP320/300TC-G19 SRHP320/300TC-G16 |
| Main products > Thrusters > DC > SR_SRV_SRL | SRVP300/300TC SRV300/300TC |
| Vikt | Value |
|---|---|
| Net weight | 94kg / 207lbs |
Retract mechanical SRV300 Common
Guide till navigering av reservdelar
Nedan ser du toppnivå av reservdelsenheter tillgängliga för dig. Om du önskar en komponent inom den presenterade enheten, klicka på namnetiketten under bilden för att komma till en detaljerad reservdelslista för den enheten. Om inga ytterligare reservdelar finns tillgängliga betyder det att den aktuella enheten måste köpas som en helhet på grund av service- eller installationskrav.
+
-
⇔
PHOTO NOT AVAILABLE
2
DIN 912 - M4 x 12
Kvantitet: 4
Bolt,Unbraco
PHOTO NOT AVAILABLE
3
Cable actuator
Artikelnummer: 150050
Kvantitet: 2
-1.png)
PHOTO NOT AVAILABLE
7
DIN 125 - A 13
Kvantitet: 2
Washer
PHOTO NOT AVAILABLE
9
DIN EN ISO 1234 - 3,2x20
Kvantitet: 4
Locking pin
PHOTO NOT AVAILABLE
10
Locking bolt
Artikelnummer: 140003
Kvantitet: 2
PHOTO NOT AVAILABLE
11
DIN 913 - M4 x 20
Kvantitet: 1
Threaded pin
PHOTO NOT AVAILABLE
12
DIN 985 - M4x0,7
Kvantitet: 1
Lock Nut
PHOTO NOT AVAILABLE
14
M4 x 25 A4
Kvantitet: 2
Phililps pan head screw
PHOTO NOT AVAILABLE
15
DIN 127 - A 4
Kvantitet: 2
Spring Lock Washer
PHOTO NOT AVAILABLE
16
DIN 125 - A 4,3
Kvantitet: 2
Flat Washer
PHOTO NOT AVAILABLE
18
ISO 10642 - M4 x 30
Kvantitet: 2
Screw
PHOTO NOT AVAILABLE
20
Cable SRV/SRH 300
Artikelnummer: 150054
Kvantitet: 1
PHOTO NOT AVAILABLE
22
1 Retract Horizontal Shaft Kit - 300mm
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN 7991 - M4x12 A4
Kvantitet: 4
Hex socket countersunk head cap screw
PHOTO NOT AVAILABLE
2
Parallel key DIN 6885
Artikelnummer: 140149
Kvantitet: 4
PHOTO NOT AVAILABLE
3
Lifting arm PS
Artikelnummer: 135434
Kvantitet: 1
PHOTO NOT AVAILABLE
4
DIN 125 - A 29
Artikelnummer: 115004
Kvantitet: 2
PHOTO NOT AVAILABLE
6
Lifting arm SB
Artikelnummer: 135433
Kvantitet: 1
PHOTO NOT AVAILABLE
7
Position marker
Artikelnummer: 140197
Kvantitet: 1
PHOTO NOT AVAILABLE
8
DIN 912 - M5 x 8
Kvantitet: 2
Bolt Unbraco
2 Upper vertical drive shaft kit SRV300
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN 912 - M6 x 20
Kvantitet: 1
Bolt, Unbraco
PHOTO NOT AVAILABLE
2
DIN 125 - A 6,4
Kvantitet: 1
Flat Washer
PHOTO NOT AVAILABLE
3
Tool for ball bearing mounting
Artikelnummer: SM153210
Kvantitet: 1
PHOTO NOT AVAILABLE
4
DIN 471 - 25x1,2
Artikelnummer: 113003
Kvantitet: 1
PHOTO NOT AVAILABLE
5
SKF 2RS1W 61805-2RS1
Artikelnummer: SM-137108
Kvantitet: 1
PHOTO NOT AVAILABLE
6
DIN 472 - 35 x 1,5
Artikelnummer: 6 2047
Kvantitet: 1
PHOTO NOT AVAILABLE
7
DIN 3760 - AS - 25 x 35 x 7 - NBR - Stainless
Artikelnummer: SM155461
Kvantitet: 2
PHOTO NOT AVAILABLE
8
Slide bearing
Artikelnummer: SM155182
Kvantitet: 1
PHOTO NOT AVAILABLE
9
Vertical drive shaft Assembly
Artikelnummer: SM153092
Kvantitet: 1
PHOTO NOT AVAILABLE
10
DIN EN ISO 1234 - 3,2x12
Kvantitet: 1
Split lock pin
PHOTO NOT AVAILABLE
11
Lower drive shaft joint
Artikelnummer: 140837
Kvantitet: 1
PHOTO NOT AVAILABLE
12
DIN 7 - 10 x 32 m6
Kvantitet: 2
Parallel pin
PHOTO NOT AVAILABLE
13
DIN 6885 - A 6 x 6 x 20
Kvantitet: 1
Key
PHOTO NOT AVAILABLE
14
Pin Ø8 L46,2
Artikelnummer: SM-143798
Kvantitet: 1
3 Aluminiumanod SP/SE/SH 125 till 300
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
Alu anode
Artikelnummer: 10 9998
Kvantitet: 1
PHOTO NOT AVAILABLE
2
Bolt
Kvantitet: 1
DIN 912 - M6 x 30
4 Tunnel kit retract Ø300mm TC, complete
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN EN ISO 1234 - 3,2x20
Kvantitet: 2
Split lock pin
PHOTO NOT AVAILABLE
2
DIN 3771 - 48,9 x 2,62 - NBR
Kvantitet: 2
O-ring
PHOTO NOT AVAILABLE
3
Turn ring Ø45
Artikelnummer: 6 2140
Kvantitet: 2
PHOTO NOT AVAILABLE
4
Wype Ring
Artikelnummer: 140030
Kvantitet: 2
PHOTO NOT AVAILABLE
5
Tunnel bracket
Artikelnummer: 140833
Kvantitet: 1
PHOTO NOT AVAILABLE
6
DIN EN ISO 1234 - 6,3x44
Kvantitet: 2
Split lock pin
PHOTO NOT AVAILABLE
7
DIN EN ISO 1234 - 3,2x12
Kvantitet: 1
Split lock pin
PHOTO NOT AVAILABLE
8
Ø8 x 46,2 mm
Kvantitet: 1
Pin bolt
PHOTO NOT AVAILABLE
9
Lower drive shaft joint
Artikelnummer: 140837
Kvantitet: 1
PHOTO NOT AVAILABLE
10
DIN 7 - 10 x 32 m6
Kvantitet: 2
Parallel pin
PHOTO NOT AVAILABLE
11
O-ring 12,5 x 1,8
Kvantitet: 1
O-ring
PHOTO NOT AVAILABLE
12
Blind plug
Artikelnummer: 75088
Kvantitet: 1
PHOTO NOT AVAILABLE
14
Tunnel
Artikelnummer: 140803
Kvantitet: 1
PHOTO NOT AVAILABLE
16
Bushing for drive pins
Artikelnummer: 140958
Kvantitet: 1
5 Horizontal shaft sealing bushing kit
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN EN ISO 1234 - 3,2x20
Artikelnummer: 113005
Kvantitet: 2
PHOTO NOT AVAILABLE
2
Sleeve bearing Ø50 ø45 L50
Artikelnummer: 140060
Kvantitet: 2
PHOTO NOT AVAILABLE
3
DIN 3771 - 48,9 x 2,62 - NBR
Artikelnummer: 6 2141
Kvantitet: 2
PHOTO NOT AVAILABLE
4
Turn ring Ø45
Artikelnummer: 6 2140
Kvantitet: 2
PHOTO NOT AVAILABLE
5
Wype Ring
Artikelnummer: 140030
Kvantitet: 2
PHOTO NOT AVAILABLE
6
Sleeve bearing Ø32 Ø28 L20
Artikelnummer: 140019
Kvantitet: 2
PHOTO NOT AVAILABLE
7
Thrust Washer Ø48 Ø28 W=1,5 8Igludur X)
Artikelnummer: 140020
Kvantitet: 4
PHOTO NOT AVAILABLE
8
DIN EN ISO 1234 - 6,3x44 (A4)
Artikelnummer: 113006
Kvantitet: 2
PHOTO NOT AVAILABLE
9
Pin Ø8 L46,2
Artikelnummer: SM-143798
Kvantitet: 1
PHOTO NOT AVAILABLE
10
DIN EN ISO 1234 - 3,2x12 (A4)
Artikelnummer: 103012
Kvantitet: 1
6 Retract ring kit Ø300mm
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
Sleeve bearing
Artikelnummer: 140024
Kvantitet: 2
PHOTO NOT AVAILABLE
2
Thrust washer
Artikelnummer: 6 2083
Kvantitet: 4
PHOTO NOT AVAILABLE
3
DIN 933 - M10 x 20 (A4)
Kvantitet: 2
Hex Head Bolt
PHOTO NOT AVAILABLE
5
DIN 934 - M10 (A4)
Kvantitet: 8
Nut
PHOTO NOT AVAILABLE
6
DIN 7991 - M10x70 A4
Kvantitet: 4
Hexagon socket countersunk head cap screws
PHOTO NOT AVAILABLE
7
Connecting rod
Artikelnummer: 140807
Kvantitet: 2
PHOTO NOT AVAILABLE
8
Twist ring
Artikelnummer: 140763
Kvantitet: 2
PHOTO NOT AVAILABLE
9
DIN 125 - A 10,5 (A4)
Kvantitet: 6
Washer
PHOTO NOT AVAILABLE
10
DIN 985 - M10x1,5 (A4)
Kvantitet: 6
Lock Nut
7 Gearleg SRV300 replacement kit
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
4
Bushing for drive pins
Artikelnummer: 140958
Kvantitet: 1
8 Gearleg SRV300TC w/out propeller
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN 912 - M10 x 60
Kvantitet: 2
Bolt, Unbraco
PHOTO NOT AVAILABLE
2
DIN 127 - A 10
Kvantitet: 2
Spring lock washer
PHOTO NOT AVAILABLE
3
DIN 125 - A 10,5
Kvantitet: 2
Washer
PHOTO NOT AVAILABLE
5
Bolt w/copper gasket
Artikelnummer: 10 1220
Kvantitet: 1
PHOTO NOT AVAILABLE
7
DIN 125 - A 17
Kvantitet: 2
Washer
PHOTO NOT AVAILABLE
8
DIN 985 - M16x2
Kvantitet: 2
Lock Nut
9 Service kit retract 300mm
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
Wyper ring
Artikelnummer: 141063
Kvantitet: 1
PHOTO NOT AVAILABLE
2
O-ring 41,28x3,53
Kvantitet: 1
--
PHOTO NOT AVAILABLE
3
DIN 3760 - AS - 40 x 50 x 7 - NBR - Stainless
Artikelnummer: SM167034
Kvantitet: 2
PHOTO NOT AVAILABLE
4
Inverted Internal Circlip DIN 5008 50x2
Artikelnummer: 141265
Kvantitet: 1
PHOTO NOT AVAILABLE
5
O-ring Ø50x4
Kvantitet: 2
--
Ansvarsfriskrivning
Sleipners garantier gäller endast om original reservdelar används. Installatören har ensam ansvaret för monteringen av reservdelarna. Montera inte reservdelar såvida du inte har full kunskap och kompetens. Om reservdelen är felaktigt monterad är Sleipner Group inte ansvarig för eventuella skador som uppstår.
Informationen i dokumentet var korrekt när det publicerades. Sleipner Group tar dock inte ansvar för eventuella felaktigheter eller bortfall. Kontinuerlig produktförbättring kan ändra produktspecifikationerna utan föregående meddelande. Följaktligen kan Sleipner Group inte ta ansvar för eventuella skillnader mellan produkt och dokument.
-
A legacy that commits
We’ve lived and worked with the unruly sea for a hundred years. That’s why we develop important features that enables a boat to handle the sea better – that enable you to enjoy your boat, at anchor and at full speed. That is why you wanted a boat, isn’t it?
-
Beautiful engineering
The technology in our solutions is world-class. We know, because we’ve developed it ourselves, just as we manufacture every solution, and follow them until their fixed to a hull, ourselves. This meticulous attention to detail is why your day out always will be better with a Sleipner aboard.
-
Worldwide service
We take pride in our solutions’ function throughout their lifespan. So, we never really let them out of sight, even when they’ve left for distant shores. Our global network is there to ensure continuous optimal function. You know what you get with a Sleipner, today and tomorrow.